Alptech Website

SHARK 281 -CCS MACHINE

Country:

Description:

DESCRIPTION

SHARK 281 CCS (Cut Control System) manual band sawing machine to cut from 0 up to 60left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight controlled by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/closed by a manually-controlled valve (optional with pedal control).

Specification

A FEW FEATURES

Electric panel (wiring totally identifiable, standby, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto thermal overload, minimum tension coil, protection against missing phase, low tensionsafety device (LTSD 24 V).

IP55 control handle.

Vice with fast clamping device.

Hydraulic transducer to visualize band tensioning.

Electric pump for band lubrication and cooling.

Wire chip brush for band cleaning.

Double head return spring.

Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.

Stock support arm with roller predisposed to mount loading table. - Bi-metal band for solids and section. - Service keys and instructions manual for maintenance and spare parts list. - The CUT CONTROL SYSTEM (CCS) can be retrofitted on machines out in the field.